Beer Equipment - Aeration Systems

Cat #	Description	Size/Price	Qty	Buy
KG450	An oxygenating system designed just for home brewers.  Comes with a regulator, sterile inline filter, our .5 micron stainless steel oxygenation stone and tubing. This Oxygenation System uses a disposable oxygen tank (Not Included)   These are readily available at most hardware stores and will last you approximately 10-15 five gallon batches.  Takes around 1-2 minutes of operation to achieve adequate oxygen levels, depending on the starting gravity of the wort	$44.95		Temporarily Unavailable
KG448	In Line Sanitary Air Filter - An inline sanitary filter that filters down to .023 micron with a 99.99% efficiency. Use it anywhere you need to keep something sanitary. Fits both ¼” and 3/8” tubing and drilled stoppers. Care and Storage - There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use a contact sanitizing spray. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. Can last up to 1 year. Discard if there are any signs of discoloration.	$4.95
KG456	Stainless Steel Aeration Stone - All stainless steel with a .5 micron pore size and 1/4" hose barb. Smaller holes will pack more oxygen into your wort for a healthier fermentation.	$13.95