|
We are proud to carry these fine advanced home brewing products from Blichmann Engineering. To find out
more about any of these products, go to the Blichmann Engineering
web site.
A great valve for a competitive price. All stainless construction and Teflon seals mean a lifetime of
use. 3 piece design means you can disassemble for cleaning/sanitizing and replacing seals.
1/2" Female NPT.
|
| VA150 |
Blichmann 3 Piece Ball Valve |
- High efficiency 72,000 BTU/hr burner
- Fast heating
- Non rusting fume free stainless frame
- Excellent outdoor flame stability
- Quiet operation
- Great low setting performance
| BP220 |
Stainless Steel Propane Burner |
- All pots come standard with an adjustable dial face Brewmometer, a 3 piece Stainless Steel Ball Valve with a
Dip Tube and a Heavy Duty Glass Level Gauge that features a stainless steel guard etched with volume graduations,
a cleaning brush and clean-out ports.
- Available in many sizes designed to accommodate typical home brew batch sizes. 10, 15, 20, 30, and 55 gallon.
- Heavy 18ga 304 Stainless Steel Construction
- Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of the bottom.
| BP150 |
BoilerMaker 10 Gallon |
| BP155 |
BoilerMaker 15 Gallon |
| BP160 |
BoilerMaker 20 Gallon |
| BP165 |
BoilerMaker 30 Gallon |
| BP170 |
BoilerMaker 55 Gallon |
This elegantly simple design automatically sets the hot liquor flow
rate and liquid level in your mash / lauter tun. As you change the sparge rate
into your boil kettle, the AutoSparge™ automatically responds by increasing or
decreasing your hot liquor flow to compensate and keeps a constant level in your
tun. Works great with gravity systems OR with pumps. Fits any pot larger than
12" in diameter including converted kegs and is adaptable to coolers.
Offered exclusively for the BoilerMaker Brew Pots. Convert your BoilerMaker into a mash tun for all grain brewing with this ingenious accessory.
New patent pending design that combines the high effeciency of perforated false bottoms and the plug resistance of a slotted manifold.
Rests securely and snugly on the stepped bottom of the pot.
(Please note:
these false bottoms will not work with other manufacturers brewpots)
| BP190 |
BoilerMaker 10 Gal False Bottom |
| BP191 |
BoilerMaker 15 Gal False Bottom |
| BP192 |
BoilerMaker 20 Gal False Bottom |
| BP193 |
BoilerMaker 30 Gal False Bottom |
| BP194 |
BoilerMaker 55 Gal False Bottom |
The HopBlocker is a boil kettle filtration system, that has up to 95% efficiency and is
virtually impervious to plugging! Traditional screen filters can quickly plug with pellet hops
and other fine break material.
When using the HopBlocker the settled fine break material (hops and trub) stay
undisturbed at the bottom of the pot while draining the majority of the wort
through a coarse filter from the top down. When the wort level is just a couple
inches from the bottom of the pot, you then expose the fine filter element by
lifting the shield and the remainder of the wort is filtered. Quickly and easily
installs in any size BoilerMaker Brewpot but can also be installed in any
brewpot.
|
 The HopRocket™ is an innovative, feature packed hop infusing tool! Not only can it be used as a hopback, it doubles as an in-line hop infuser
(Randalizer) for your beer dispensing system and TRIPLES as an in-line filter!
The HopRocket has been designed by Blichmann from the ground up and the features include:
- Pressure tight - up to 40 PSI operation!
- Holds up to 4oz of whole hops
- 100% stainless construction & silicone seals
- Fully enclosed system from brew pot to fermentor means no volitile hop aromas are lost!
- Inlet at the bottom allows air to automatically purge to reduce hot-side aeration
- Fine filter with wiper seal sends very clear wort to your fermentor.
- Coarse filter and cone bottom inlet prevents wort channeling and backup for even hop utilization
- Works on gravity systems and with pumps (about 4ft (1M) of static head is recommended for best gravity performance)
- Doubles as an awesome hop infuser (Randalizer) for your dispensing system
- 1/2" NPT (male) connections
- Dimensions: 10" H, 6.5" wide (fittings to fittings)
|
| BP198 |
The Hop Rocket |
 This is the
Ultimate in brewing flexibility! The system starts with a Base Stand made from a
massive, high strength aluminum mast with integral T-slots for mounting the
tiers and legs. You then choose any combination of Burner Tiers or Shelf Tiers.
Up to three tiers can be used at one time and set up in any order that best fits
your brewing style. Best of all, you can re-configure the stand at any time to
adapt as your brewing techniques and equipment changes. Tiers will fit any
manufacturers pots, coolers and kegs up to 21" in diameter and up to 30 gallons,
enabling you to re-use your existing equipment. System quickly knocks down for
storage or transport and is able to be shipped through inexpensive common
carrier.
 Includes three sets of tier mounting arms that will fit either a burner or a shelf.
Each tier can be mounted in any position on all 4 faces of the mast.
Shipped from manufacturer
 The perfect combination of power (72,000 BTU), efficiency, durability and quietness.
Heavy gauge stainless steel burner frame will never rust and is built to last a lifetime.
Holds pots up to 30 gallons (20" diameter)
Shipped from manufacturer.
| GE501 |
Stainless Burner Tier |
Choose a shelf tier if you want to use a cooler and you do not want
heat on the tier. Fits up to 10 gallon round coolers and most rectangular coolers.
16" x 16" Can hold a maximum weight of 175 lbs.
Shipped from manufacturer.
NOT for pots or coolers, can only hold a maximum of 50 lbs. 10" x 10".
Shipped from manufacturer.
|
|
 The Fermenator is a beautifully designed product
for the discriminating brewer. Its features provide commercial brewery
functionality at a consumer price. The standard 7 gal. and 14.5 gal.
sizes are perfect for 5 and 10 gal. batches. It’s easy to use and
loaded with standard features including:
- 100% Stainless Steel
- Weld Free Interior
- Easy to Clean Weld Free Fittings
- Rotating Racking Arm
- Pressurizable
These are just a few of the features of this
amazing piece of
equipment.
| FE500 |
7 gallon Stainless Steel Fermenator
Shipped from manufacturer, call for shipping costs. |
| FE510 |
Leg Extensions for 7 gallon Stainless Steel Fermenator
Shipped from manufacturer, call for shipping costs. |
| FE505 |
14.5 gallon Stainless Steel Fermenator
Shipped from manufacturer, call for shipping costs. |
| FE515 |
Leg Extensions for 14.5 gallon Stainless Steel Fermenator
Shipped from manufacturer, call for shipping costs. |
|
|
|
Home
Offered exclusively for the BoilerMaker Brew Pots. Convert your BoilerMaker into a mash tun for all grain brewing with this ingenious accessory.
New patent pending design that combines the high effeciency of perforated false bottoms and the plug resistance of a slotted manifold.
