|
| BP115 |
5 Gallon Stainless Steel Brewpot
- High quality stainless steel in a size convenient for household stoves. |
 |
| BP120 |
9 Gallon Stainless Steel Brewpot
- Heavy duty
pots have sturdy handles and come with a lid.
8 mm, 20 guage, 304 stainless steel. These are NICE pots and you
can't beat the price! |
 |
| BP130 |
15.5 Gallon Stainless Steel Brewpot
- |
- All pots come standard with an adjustable dial face Brewmometer, a 3 piece Stainless Steel Ball Valve with a
Dip Tube and a Heavy Duty Glass Level Gauge that features a stainless steel guard etched with volume graduations,
a cleaning brush and clean-out ports.
- Available in many sizes designed to accommodate typical home brew batch sizes. 10, 15, 20, 30, and 55 gallon.
- Heavy 18ga 304 Stainless Steel Construction
- Exclusive snap-in dip tube design installs without tools and drains to within 3/8” of the bottom.
- Go to Blichmann Engineering for more information
| BP150 |
BoilerMaker 10 Gallon |
| BP155 |
BoilerMaker 15 Gallon |
| BP160 |
BoilerMaker 20 Gallon |
| BP165 |
BoilerMaker 30 Gallon |
| BP170 |
BoilerMaker 55 Gallon |
This elegantly simple design automatically sets the hot
liquor flow rate and liquid level in your mash / lauter tun. As you change
the sparge rate into your boil kettle, the AutoSparge™ automatically responds
by increasing or decreasing your hot liquor flow to compensate and keeps a
constant level in your tun. Works great with gravity systems OR with pumps.
Fits any pot larger than 12" in diameter including converted kegs and is
adaptable to coolers. (find detailed installation instructions on
www.blichmannengineering.com)
Offered exclusively for the BoilerMaker Brew Pots. Convert your BoilerMaker into a mash tun for all grain brewing with this ingenious accessory.
New patent pending design that combines the high effeciency of perforated false bottoms and the plug resistance of a slotted manifold.
Rests securely and snugly on the stepped bottom of the pot.
(Please note:
these false bottoms will not work with other manufacturers brewpots)
| BP190 |
BoilerMaker 10 Gal False Bottom |
| BP191 |
BoilerMaker 15 Gal False Bottom |
| BP192 |
BoilerMaker 20 Gal False Bottom |
| BP193 |
BoilerMaker 30 Gal False Bottom |
The HopBlocker is a boil kettle filtration system, that has up to 95% efficiency and is
virtually impervious to plugging! Traditional screen filters can quickly plug with pellet hops
and other fine break material.
When using the HopBlocker the settled fine break material (hops and trub) stay undisturbed at
the bottom of the pot while draining the majority of the wort through a coarse filter from the
top down. When the wort level is just a couple inches from the bottom of the pot, you then
expose the fine filter element by lifting the shield and the remainder of the wort is filtered.
Quickly and easily installs in any size BoilerMaker Brewpot but can also be installed in any brewpot
(find detailed installation instructions on
www.blichmannengineering.com)
Attaches to any electric hand held drill for quick,
thorough mixing. 24" long and easily fits through the neck
of a carboy. Great for degassing wine.
Wine Degasser attaches to any electric drill to quickly remove carbonation from your wine.
14 " long.
|
| SS130 |
21" Stainless Steel Spoon -
highest quality stainless. |
| SS140 |
Stainless Steel Scoop/Colander - Great for scooping and draining. 8.5"; long handle, 3 cup capacity. |
| SS170 |
 42" Stainless Steel Paddle -
One of our favorite new products! Sturdy but light, great for your largest brewpots or mash kettles.
No more scorched fingers with this baby. |
| SS105 |
28" Plastic Spoon - Heat resistant plastic. Small paddle on handle end, perfect for stirring carboys. |
| SS100 |
24" Plastic Spoon - Heat resistant plastic. Small paddle on handle end, perfect for stirring carboys. |
| SS115 |
28" Plastic Paddle - Has a 3 inch wide slotted paddle on one end. |
| SS110 |
24" Plastic Paddle - Has a 3 inch wide slotted paddle on one end. |
|
Offered exclusively for the BoilerMaker Brew Pots. Convert your BoilerMaker into a mash tun for all grain brewing with this ingenious accessory.
New patent pending design that combines the high effeciency of perforated false bottoms and the plug resistance of a slotted manifold.
