||Small Nylon hop bag (with drawstrings)
||3" Stainless Steel Mesh Hop Ball
The HopRocket™ is an innovative, feature packed hop infusing tool! Not only can it be used as a hopback, it doubles as an in-line hop infuser
(Randalizer) for your beer dispensing system and TRIPLES as an in-line filter!
The HopRocket has been designed by Blichmann from the ground up and the features include:
- Pressure tight - up to 40 PSI operation!
- Holds up to 4oz of whole hops
- 100% stainless construction & silicone seals
- Fully enclosed system from brew pot to fermentor means no volitile hop aromas are lost!
- Inlet at the bottom allows air to automatically purge to reduce hot-side aeration
- Fine filter with wiper seal sends very clear wort to your fermentor.
- Coarse filter and cone bottom inlet prevents wort channeling and backup for even hop utilization
- Works on gravity systems and with pumps (about 4ft (1M) of static head is recommended for best gravity performance)
- Doubles as an awesome hop infuser (Randalizer) for your dispensing system
- 1/2" NPT (male) connections
- Dimensions: 10" H, 6.5" wide (fittings to fittings)
||The Hop Rocket
Quick Connectors are 100% Stainless Steel Fittings. High temp silicone grip provides a cool touch even with hot
liquids and the Ribbed grips allow quick comfortable tool-free operation. Fits all male 1/2" NPT fittings and includes a silicone o-ring.
||Quick Connector 1/2" Barb x 1/2" NPT
||Quick Connector 3/8" Barb x 1/2" NPT
High Temp Silicone Tubing - Odorless, tasteless, and inert Silicone tubing is
FDA food-grade approved from -100F to 500F. Great for any time that the wort in contact with tubing will be above 180F. This tubing
is not designed to hold pressures above 20psi.
|| 3/8" ID * 5/8" OD
|| 1/2" ID * 3/4" OD