The Home Brewery - Siphoning Equipment

Getting Started

Basic Equipment

Airlocks & Stoppers

Brewpots & Spoons

Carboy Accessories

Fermenters - Plastic

Fermenters - Stainless

Advanced Equipment

Kegging Equipment

Bottling Equipment

Home

Table of Contents

Order a Catalog

Shopping Cart

Ordering Info

Siphoning Equipment Siphoning Equipment for 3/8 inch tubing
Cat #	Description		Size/Price	Qty	Buy
BE300	Racking Tube Clamp - Holds Racking Tube in place		$2.50
BE100	3/8 in. Siphon Tubing - 3/8" inside diameter.		$0.45 per ft.
BE212	Stainless Steel Racking Tube - 24" cane with the same external dimension as the common plastic cane but a 50% larger internal dimension for a faster, smoother flow.		$9.95
BE213	Stainless Steel Racking Screen - 4" long stainless steel mesh with welded bottom can be applied to any of our 3/8" OD racking canes. Handles deep traub and sediment.		$6.95
BE200	Racking Tube - 24" curved top.		$1.95
BE205	Racking Tube - 30" curved top.		$2.50
BE215	Auto Siphon - Siphon starter. This is the best! One stroke of the hand and you have a siphon going in as little as an inch of fluid.		$10.95
BE302	AutoSiphon Clamp - Same as racking tub clamps but sized for the autosiphon.		$3.50
BE275	Plastic Spigot - Drill a 1" hole to install in plastic fermenter.		$3.50
BE305	Small Tubing Clamp - for 3/8" tubing.		$0.75
BE310	Large Tubing Clamp - for 3/8" tubing.		$1.95
BE315	In-Line Valve - For 3/8 in” flexible tubing.		$1.95

Siphoning Equipment for 1/2 inch tubing
Cat #	Description	Size/Price	Qty	Buy
BE216	Fast Flow Auto Siphon - 1/2 inch Siphon starter.	$14.95
BE303	1/2 in. AutoSiphon Clamp - Same as racking tub clamps but sized for the autosiphon.	$3.75
BE210	1/2 in. Racking Tube - 30” length, curved top. Larger diameter for faster flow.	$4.25
BE105	1/2 in. Siphon Tubing - fits 1/2 in. equipment.	$0.50 per ft
BE301	1/2 in. Racking Tube Clamp - Holds Racking Tube in place	$2.60

High Temp Silicone Tubing
Cat #	Description	Size/Price	Qty	Buy
BE115	High Temp Silicone Tubing - Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Great for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi. 1/2" ID * 3/4" OD	$2.25 per ft.
Pumps
Cat #	Description	Size/Price	Qty	Buy
BE400	Transfer Pump - Self Priming Automatic Shut-off Thermally Protected Motor Adjustable Flow Rate .8-3.0 gallons per minute Can run continuously for 90 minutes On/Off Switch Includes: 40 mesh pre-filter 2 x 3 ft flex tubing Note: Maximum liquid temp 110 deg F (43 C)	$179.95
BE405	High Temperature Transfer Pump - This pump includes a bracket so that it can be mounted and a 6' power cord with plug wired in for easy use. It also features a continuous-duty 1/25 hp 1.4 Amp motor with a maximum flow of 7.2 gpm with a maximum head of 12 feet. 1/2" mpt fittings on both inlet and outlet. Polysulfone, pump head and 316 stainless steel, silicon rubber, Ryton and Teflon contact parts. Face unscrews and rotates at 90 degree intervals to adjust to your application. Magnetic drive, not self priming.	$195.95